Share the following woodworking band saw machine maintenance knowledge, machine tool maintenance and maintenance This machine tool is a high-speed running machinery, all parts must not fail, even a little fault, will directly affect the life of the machine tool, production efficiency and normal and reliable work. In order to ensure the normal operation and operation safety of the woodworking band saw, it is necessary to strengthen the maintenance and management of the machine tool.

1. The work site and machine tools should be cleaned frequently and kept clean, especially the resin sawdust under the saw blade and saw wheel should be cleaned more and more.

2. The bearing, gear screw, slide and other friction parts on the machine tool should be regularly lubricated.

3. When working, pay attention to whether the rolling bearing of the saw wheel above and below is abnormal, and the temperature shall not exceed 60.

4. Check and correct the components frequently. Use the method of hanging wire to check whether the upper and lower saw wheels are on a vertical plane, if there is distortion, adjust the upper wheel as appropriate, and adjust the lower wheel when the gap is too large. After the upper and lower wheels work for a period of time, the total amount will be some wear, if often check whether the upper wheel lifting system is flexible and reliable; Whether the saw card lifting device slides freely on both sides; Manual tensioning device is flexible and effective. Whether the parts are damaged; Whether the connecting parts are loose or not. If any abnormal phenomenon is found, it should be solved in time. Or scrub refueling or repair correction, and replace, in order to ensure the safe and normal operation of the machine tool.

Woodworking band saw machine, is one of the main equipment of wood processing machinery, it is the use of band saw blade for linear sawing of wood. Its main structure consists of five parts: frame, fuselage, upper and lower saw wheel, saw card and saw blade tensioning structure. The product has the characteristics of reasonable structure, reliable performance, smooth running, simple operation and high production efficiency. So the range of adaptation is wide. This band saw machine is equipped with a table can cut square wood or a log with a corresponding plane, can also cut the board or side leather sawing into profiles to be used, improve the utilization rate of wood, and woodworking sports car match, can cut a large diameter of the long log. Especially suitable for collective operation and individual processing, it is an ideal woodworking machine for wood processing industry and wood products manufacturing industry.